Laboratory Testing
Aggregates make up the largest volume 66% to 78% of material used in concrete, making testing essential
We offer a full range of aggregates testing. Our expertise allows us to use the information gained from testing to help develop concrete and mortar mix designs.
The aggregates must be clean, properly graded, hard, strong, durable, and free from chemicals or coatings of clay or other foreign materials that may inhibit the bond between the cement and aggregate. Testing must be performed to make sure that the aggregate meets all these criteria. Our clients depend on us to help them with aggregate selection and quality control.
Contact an expert for a complete list of tests we perform, or for questions concerning a particular test.
Experience
Aggregate products can vary, our testing laboratory offers a comprehensive range of testing for:
- ASTM C295 Aggregate Petrography
- Coarse Aggregate
- Fine Aggregate
- Riprap
- Alkali Silica Reactions (ASR)
- Rock Cores
Test Methods
| ASTM C29 | Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate |
| ASTM C33 | Standard Specification for Concrete Aggregates |
| ASTM C40 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete |
| ASTM C87 | Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| ASTM C88 | Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate |
| ASTM C117 | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
| ASTM C123 | Standard Test Method for Lightweight Particles in Aggregate |
| ASTM C127 | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate |
| ASTM C128 | Standard Test Method for the Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ASTM C131 | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM C136 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C142 | Standard Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM C295 | Petrographic Examination of Aggregates for Concrete |
| ASTM C330 | Standard Specification for Lightweight Aggregates for Structural Concrete |
| ASTM C331 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM C535 | Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM C566 | Total Moisture Content of Aggregate by Drying |
| ASTM C586 | Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates |
| ASTM C641 | Iron Staining Material in Lightweight Concrete Aggregate |
| ASTM C702 | Reducing Samples of Aggregate to Testing Size |
| ASTM C1077 | Standard Practice for Agencies Testing Concrete and Concrete Aggregates |
| ASTM C1105 | Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM C1252 | Uncompacted Void Content of Fine Aggregate (Influenced by shape, texture, and grading) |
| ASTM C1260 | Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
| ASTM C1293 | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
| ASTM C1567 | Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (accelerated mortar-bar method) |
| ASTM D75 | Practice for Sampling Aggregates |
| ASTM D4791 | Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate |
| ASTM D5240 | Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate |
| ASTM D5312 | Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions |
| ASTM D5313 | Durability of Rock for Erosion Control Under Wetting and Drying Conditions |
| ASTM D5821 | Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM E329 | Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction |
| ASTM R18 | Establishing and Implementing a Quality System for Construction Materials Testing Laboratories |
| ISO/TEC 17025 | General Requirements for the Competence of Testing and Calibration of Laboratories |